proposed how to section

[Shecallsmemaster]

When you have gotten all of your materials together the first thing that you want to do is get the person that you will be using the ball gag on. Wrap the belt around like you are going to buckle it, cover the mouth with the belt an make sure that the buckle is centered in the back of there head, bring the tail of the belt around to about there ear should give enough room to play with. Now with a pencil or pen mark the belt just infront of the ear, also mark the belt in the center against the buckle that will be the hole punched to fit your subs head. Move around in front of your sub an mark another spot in the middle of the belt in the middle of there mouth. Now that you have made your marks remove the belt from your sub an take it to a sturdy work area. The first hole to punch will be the one that was made against the buckle. Before you punch any holes you will need to protect the work surface under the belt, i've found it useful to get one of those white plastic cutting boards from wal-mart or a dollar store beats having to exsplain to the mr. or mrs. why there is holes punched in the counter (been there done that). Okay now that you have protected the work surface proceed with punching holes. The hole that you made over the mouth needs to be just big enough for the bolt to go through. If you only plan on using this gag on one person then just punch the single hole in the back that we made next to the buckle, gauge the holes by inserting different size punches in the tail of the belt. Cut the belt at the mark made infront of the ear. Once you have done all this it's time to assemble. Put the bolt through the hole an screw on the ball,if my memory serves me right the head of the bolt is 3/4" so you will either need a 3/4" wrench or a crecent wrench also know as a adjustable wrench, fit all, knuckle buster. Snug the bolt down so that the ball does not spin freely. Now its time to try it on. Your sub has proably wondered off by now so you will proably find them sitting in front of the computer looking at more how to's from shecallsmemaster. The ball that is picuted above can be found at www.reidsupply.com